| WBS | Project Categories | Labor Hrs. | Start Date | Finish Dates | Duration | : | Comments |
| | DEPARTMENT TOTAL | 28,736 | 11/13/24 | 12/13/24 | . | : | . |
| 2 | EXTERIOR PAINT | 27,688 | 11/13/24 | 12/13/24 | 4.6w | : | |
| 3 | MECHANICAL SYSTEMS | 392 | 12/06/24 | 12/13/24 | 67.2w | : | |
| 4 | ENGINE ROOM | 392 | 11/25/24 | 12/13/24 | 13.7w | : | |
| 6 | INTERIOR | 128 | 12/12/24 | 12/13/24 | 4.2w | : | |
| 7 | MECHANICAL SPACES | | 11/25/24 | 12/13/24 | 3.0w | : | |
| 8 | EXTERIOR | 136 | 12/09/24 | 12/13/24 | 33.2w | : | |
| | |
| ******** | ****************************** | ******** | *********** | *********** | ********** | | *********** |
|
|
| WBS | Job Description | Labor Hrs. | Start Date | Finish Date | Duration | : | Comments |
| 2 | EXTERIOR PAINT | 27,688 | 11/13/24 | 12/13/24 | 4.6w | : | |
| 202 | Hull - Portside | 5,904 | 11/27/24 | 12/13/24 | 2.5w | : | |
| 202-01 | Marine Painting | 5,904 | 11/27/24 | 12/13/24 | 2.5w | : | |
| 202-01-01 | STBD Hull surface | 2,160 | 11/27/24 | 12/13/24 | 100.0h | : | |
| 202-01-01-C | Labor | 2,160 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 02 | Set up area for paint proccess | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 03 | Sand and prepare metal surface for primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 04 | Apply zinc chromate primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 05 | Apply high build | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 06 | Sand and prepare high build for fairs | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 07 | Apply fairing compound and fair smooth | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 08 | Repair and fill pinholes in fairing surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 09 | Final preparation of fair surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-01-C 10 | Clean up and protect surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-02 | STBD Rubrail | 432 | 12/03/24 | 12/13/24 | 72.0h | : | |
| 202-01-02-C | Labor | 432 | 12/03/24 | 12/13/24 | 72.0h | : | |
| 202-01-02-C 01 | Inspection and repair surface | 144 | 12/03/24 | 12/05/24 | 24.0h | : | |
| 202-01-02-C 02 | Repair pinholes | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 202-01-02-C 03 | Repair pinholes to finish primer | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 202-01-03 | Wing deck Hull surface | 2,160 | 12/05/24 | 12/13/24 | 50.0h | : | |
| 202-01-03-C | Labor | 2,160 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 01 | Set up area for paint proccess | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 02 | Sand and prepare metal surface for primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 03 | Apply zinc chromate primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 04 | Apply high build | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 05 | Sand and prepare high build for fairs | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 06 | Apply fairing compound and fair smooth | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 07 | Repair and fill pinholes in fairing surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 08 | Final preparation of fair surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-03-C 09 | Clean up and protect surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 202-01-04 | Final Primer | 432 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 202-01-04-B | Labor | 432 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 202-01-04-B 01 | Apply finish primer | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 202-01-04-B 02 | Final sand and smooth | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 202-01-04-B 03 | Repair surface and prep for show caot | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 202-01-05 | Show coat | 432 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 202-01-05-B | Labor | 432 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 202-01-05-B 01 | Apply show coat | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 202-01-05-B 02 | Final sand and smooth | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 202-01-05-B 03 | Repair surface and prep for top coat | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 202-01-06 | Top coat | 288 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 202-01-06-B | Labor | 288 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 202-01-06-B 01 | Clean/prep for final paint | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 202-01-06-B 02 | Apply finish top coat | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203 | Hull - STBD Side | 5,904 | 11/27/24 | 12/13/24 | 2.5w | : | |
| 203-06 | Marine Painting | 5,904 | 11/27/24 | 12/13/24 | 2.5w | : | |
| 203-06-01 | STBD Hull surface | 2,160 | 11/27/24 | 12/13/24 | 100.0h | : | |
| 203-06-01-L | Labor | 2,160 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 02 | Set up area for paint proccess | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 03 | Sand and prepare metal surface for primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 04 | Apply zinc chromate primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 05 | Apply high build | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 06 | Sand and prepare high build for fairs | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 07 | Apply fairing compound and fair smooth | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 08 | Repair and fill pinholes in fairing surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 09 | Final preparation of fair surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-01-L 10 | Clean up and protect surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-02 | STBD Rubrail | 432 | 12/03/24 | 12/13/24 | 72.0h | : | |
| 203-06-02-L | Labor | 432 | 12/03/24 | 12/13/24 | 72.0h | : | |
| 203-06-02-L 01 | Inspection and repair surface | 144 | 12/03/24 | 12/05/24 | 24.0h | : | |
| 203-06-02-L 02 | Repair pinholes | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 203-06-02-L 03 | Repair pinholes to finish primer | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203-06-03 | Wing deck Hull surface | 2,160 | 12/05/24 | 12/13/24 | 50.0h | : | |
| 203-06-03-L | Labor | 2,160 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 01 | Set up area for paint proccess | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 02 | Sand and prepare metal surface for primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 03 | Apply zinc chromate primer | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 04 | Apply high build | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 05 | Sand and prepare high build for fairs | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 06 | Apply fairing compound and fair smooth | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 07 | Repair and fill pinholes in fairing surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 08 | Final preparation of fair surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-03-L 09 | Clean up and protect surface | 240 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 203-06-04 | Final Primer | 432 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 203-06-04-L | Labor | 432 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 203-06-04-L 01 | Apply finish primer | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 203-06-04-L 02 | Final sand and smooth | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203-06-04-L 03 | Repair surface and prep for show caot | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203-06-05 | Show coat | 432 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 203-06-05-L | Labor | 432 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 203-06-05-L 01 | Apply show coat | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 203-06-05-L 02 | Final sand and smooth | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203-06-05-L 03 | Repair surface and prep for top coat | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 203-06-06 | Top coat | 288 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 203-06-06-L | Labor | 288 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 203-06-06-L 01 | Clean/prep for final paint | 144 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 203-06-06-L 02 | Apply finish top coat | 144 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 204 | Transom | 496 | 11/27/24 | 12/13/24 | 2.6w | : | |
| 204-06 | Marine Paint | 496 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 204-06-01 | Transom Stairway Enclosure - Port | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 204-06-01-L | Labor | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 204-06-01-L 01 | Set up area for paint proccess | 24 | 11/27/24 | 11/28/24 | 12.0h | : | |
| 204-06-01-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/29/24 | 12.0h | : | |
| 204-06-01-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/02/24 | 8.0h | : | |
| 204-06-01-L 04 | Apply high build | 16 | 12/03/24 | 12/03/24 | 8.0h | : | |
| 204-06-01-L 05 | Sand and prepare high build for fairs | 32 | 12/04/24 | 12/05/24 | 16.0h | : | |
| 204-06-01-L 06 | Apply fairing compound and fair smooth | 48 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 204-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 204-06-01-L 08 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 204-06-01-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 204-06-02 | Transom Stairway Enclosure - STBD | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 204-06-02-L | Labor | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 204-06-02-L 01 | Set up area for paint proccess | 24 | 11/27/24 | 11/28/24 | 12.0h | : | |
| 204-06-02-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/29/24 | 12.0h | : | |
| 204-06-02-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/02/24 | 8.0h | : | |
| 204-06-02-L 04 | Apply high build | 16 | 12/03/24 | 12/03/24 | 8.0h | : | |
| 204-06-02-L 05 | Sand and prepare high build for fairs | 32 | 12/04/24 | 12/05/24 | 16.0h | : | |
| 204-06-02-L 06 | Apply fairing compound and fair smooth | 48 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 204-06-02-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 204-06-02-L 08 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 204-06-02-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 204-06-03 | Final Primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 204-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 204-06-03-L 01 | Apply high build | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 204-06-03-L 02 | Sand high build to smooth | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 204-06-03-L 03 | Apply epoxy primer | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 204-06-03-L 04 | Final sand and smooth | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 204-06-04 | Top coat | 48 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 204-06-04-L | Labor | 48 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 204-06-04-L 01 | Apply top coat primer | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 204-06-04-L 02 | Apply finish top coat | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 204-06-04-L 03 | Apply decking non-skid | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 210 | Main deck - Cabin sides | 1,008 | 11/21/24 | 12/13/24 | 3.3w | : | |
| 210-06 | Marine Painting | 1,008 | 11/21/24 | 12/13/24 | 3.3w | : | |
| 210-06-01 | Fwd Cabin sides | 888 | 11/21/24 | 12/13/24 | 132.0h | : | |
| 210-06-01-L | Labor | 888 | 11/21/24 | 12/13/24 | 132.0h | : | |
| 210-06-01-L 01 | Set up area for paint proccess | 72 | 11/21/24 | 11/22/24 | 12.0h | : | |
| 210-06-01-L 02 | Sand and prepare metal surface for primer | 72 | 11/25/24 | 11/26/24 | 12.0h | : | |
| 210-06-01-L 03 | Apply zinc chromate primer | 48 | 11/26/24 | 11/27/24 | 8.0h | : | |
| 210-06-01-L 04 | Apply high build | 48 | 11/27/24 | 11/28/24 | 8.0h | : | |
| 210-06-01-L 05 | Sand and prepare high build for fairs | 144 | 11/28/24 | 12/03/24 | 24.0h | : | |
| 210-06-01-L 06 | Apply fairing compound and fair smooth | 288 | 12/03/24 | 12/11/24 | 48.0h | : | |
| 210-06-01-L 07 | Repair and fill pinholes in fairing surface | 72 | 12/11/24 | 12/12/24 | 12.0h | : | |
| 210-06-01-L 08 | Final preparation of fair surface | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 210-06-01-L 09 | Clean up and protect surface | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 210-06-02 | Final Primer | 24 | 12/11/24 | 12/13/24 | 18.0h | : | |
| 210-06-02-L | Labor | 24 | 12/13/24 | 12/13/24 | 0.1w | : | |
| 210-06-02-L 01 | Apply high build | 6 | 12/13/24 | 12/13/24 | 1.0h | : | |
| 210-06-02-L 02 | Sand high build to smooth | 6 | 12/13/24 | 12/13/24 | 1.0h | : | |
| 210-06-02-L 03 | Apply epoxy primer | 6 | 12/13/24 | 12/13/24 | 1.0h | : | |
| 210-06-02-L 04 | Final sand and smooth | 6 | 12/13/24 | 12/13/24 | 1.0h | : | |
| 210-06-03 | Top coat | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 210-06-03-L | Labor | 96 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 210-06-03-L 01 | Apply top coat primer | 48 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 210-06-03-L 02 | Apply finish top coat | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211 | Main deck - Fwd | 448 | 11/28/24 | 12/13/24 | 11.5d | : | |
| 211-06 | Marine Paint | 448 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 211-06-01 | Anchor Windlass/Pulpit Area | 184 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 211-06-01-L | Labor | 184 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 211-06-01-L 01 | Set up area for paint proccess | 16 | 11/28/24 | 11/29/24 | 8.0h | : | |
| 211-06-01-L 02 | Sand and prepare metal surface for primer | 16 | 11/29/24 | 12/02/24 | 8.0h | : | |
| 211-06-01-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/03/24 | 8.0h | : | |
| 211-06-01-L 04 | Apply high build | 16 | 12/03/24 | 12/04/24 | 8.0h | : | |
| 211-06-01-L 05 | Sand and prepare high build for fairs | 24 | 12/04/24 | 12/05/24 | 12.0h | : | |
| 211-06-01-L 06 | Apply fairing compound and fair smooth | 48 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 211-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 211-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 211-06-01-L 09 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 211-06-02 | Decking | 184 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 211-06-02-L | Labor | 184 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 211-06-02-L 01 | Set up area for paint proccess | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211-06-02-L 02 | Sand and prepare metal surface for primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211-06-02-L 03 | Apply zinc chromate primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211-06-02-L 04 | Apply high build | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211-06-02-L 05 | Sand and prepare high build for fairs | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 211-06-02-L 06 | Apply fairing compound and fair smooth | 48 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 211-06-02-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 211-06-02-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 211-06-02-L 11 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 211-06-03 | Final Primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 211-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 211-06-03-L 01 | Apply high build | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 211-06-03-L 02 | Sand high build to smooth | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 211-06-03-L 03 | Apply epoxy primer | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 211-06-03-L 04 | Final sand and smooth | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 211-06-04 | Top coat | 48 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 211-06-04-L | Labor | 48 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 211-06-04-L 01 | Apply top coat primer | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 211-06-04-L 02 | Apply finish top coat | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 211-06-04-L 03 | Apply decking non-skid | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 212 | Main deck - Port Walkway | 304 | 11/28/24 | 12/13/24 | 2.3w | : | |
| 212-06 | Marine Paint | 304 | 11/28/24 | 12/13/24 | 2.3w | : | |
| 212-06-01 | Cabin sides | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 212-06-01-L | Labor | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 212-06-01-L 01 | Set up area for paint proccess | 16 | 11/28/24 | 11/29/24 | 8.0h | : | |
| 212-06-01-L 02 | Sand and prepare metal surface for primer | 16 | 11/29/24 | 12/02/24 | 8.0h | : | |
| 212-06-01-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/03/24 | 8.0h | : | |
| 212-06-01-L 04 | Apply high build | 16 | 12/03/24 | 12/04/24 | 8.0h | : | |
| 212-06-01-L 05 | Sand and prepare high build for fairs | 32 | 12/04/24 | 12/06/24 | 16.0h | : | |
| 212-06-01-L 06 | Apply fairing compound and fair smooth | 64 | 12/06/24 | 12/12/24 | 32.0h | : | |
| 212-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/12/24 | 12/13/24 | 8.0h | : | |
| 212-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 212-06-01-L 09 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 212-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 212-06-02-L | Labor | 64 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 212-06-02-L 01 | Apply high build | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 212-06-02-L 02 | Sand high build to smooth | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 212-06-02-L 03 | Apply epoxy primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 212-06-02-L 04 | Final sand and smooth | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 212-06-03 | Top coat | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 212-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 212-06-03-L 01 | Apply top coat primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 212-06-03-L 02 | Apply finish top coat | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 213 | Main deck - STBD Walkway | 304 | 11/28/24 | 12/13/24 | 2.4w | : | |
| 213-06 | Marine Paint | 304 | 11/28/24 | 12/13/24 | 2.4w | : | |
| 213-06-01 | Cabin sides | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 213-06-01-L | Labor | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 213-06-01-L 01 | Set up area for paint proccess | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 213-06-01-L 02 | Sand and prepare metal surface for primer | 16 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 213-06-01-L 03 | Apply zinc chromate primer | 16 | 11/29/24 | 11/29/24 | 8.0h | : | |
| 213-06-01-L 04 | Apply high build | 16 | 12/02/24 | 12/02/24 | 8.0h | : | |
| 213-06-01-L 05 | Sand and prepare high build for fairs | 32 | 12/03/24 | 12/04/24 | 16.0h | : | |
| 213-06-01-L 06 | Apply fairing compound and fair smooth | 64 | 12/05/24 | 12/10/24 | 32.0h | : | |
| 213-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 213-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 213-06-01-L 09 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 213-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 213-06-02-L | Labor | 64 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 213-06-02-L 01 | Apply high build | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 213-06-02-L 02 | Sand high build to smooth | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 213-06-02-L 03 | Apply epoxy primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 213-06-02-L 04 | Final sand and smooth | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 213-06-03 | Top coat | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 213-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 213-06-03-L 01 | Apply top coat primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 213-06-03-L 02 | Apply finish top coat | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214 | Main deck - Aft | 984 | 11/21/24 | 12/13/24 | 3.4w | : | |
| 214-06 | Marine Paint | 984 | 11/21/24 | 12/13/24 | 136.0h | : | |
| 214-06-01 | Cabin sides | 296 | 11/21/24 | 12/13/24 | 136.0h | : | |
| 214-06-01-L | Labor | 296 | 11/21/24 | 12/13/24 | 136.0h | : | |
| 214-06-01-L 01 | Set up area for paint proccess | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 214-06-01-L 02 | Sand and prepare metal surface for primer | 24 | 11/21/24 | 11/22/24 | 12.0h | : | |
| 214-06-01-L 03 | Apply zinc chromate primer | 16 | 11/22/24 | 11/25/24 | 8.0h | : | |
| 214-06-01-L 04 | Apply high build | 16 | 11/25/24 | 11/26/24 | 8.0h | : | |
| 214-06-01-L 05 | Sand and prepare high build for fairs | 48 | 11/26/24 | 11/29/24 | 24.0h | : | |
| 214-06-01-L 06 | Apply fairing compound and fair smooth | 96 | 11/29/24 | 12/09/24 | 48.0h | : | |
| 214-06-01-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 214-06-01-L 08 | Final preparation of fair surface | 32 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 214-06-01-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-02 | Cabinets - Port | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 214-06-02-L | Labor | 208 | 11/27/24 | 12/13/24 | 104.0h | : | |
| 214-06-02-L 01 | Set up area for paint proccess | 16 | 11/27/24 | 11/27/24 | 8.0h | : | |
| 214-06-02-L 02 | Sand and prepare metal surface for primer | 16 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 214-06-02-L 03 | Apply zinc chromate primer | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-02-L 04 | Apply high build | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-02-L 05 | Sand and prepare high build for fairs | 32 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 214-06-02-L 06 | Apply fairing compound and fair smooth | 64 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 214-06-02-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 214-06-02-L 08 | Final preparation of fair surface | 32 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 214-06-02-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-03 | Seat Base - Aft | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 214-06-03-L | Labor | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 214-06-03-L 01 | Set up area for paint proccess | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-03-L 02 | Sand and prepare metal surface for primer | 16 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 214-06-03-L 03 | Apply zinc chromate primer | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-03-L 04 | Apply high build | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-03-L 05 | Sand and prepare high build for fairs | 32 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 214-06-03-L 06 | Apply fairing compound and fair smooth | 64 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 214-06-03-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 214-06-03-L 08 | Final preparation of fair surface | 32 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 214-06-03-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-04 | Overhead - Built in | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 214-06-04-L | Labor | 208 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 214-06-04-L 01 | Set up area for paint proccess | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-04-L 02 | Sand and prepare metal surface for primer | 16 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 214-06-04-L 03 | Apply zinc chromate primer | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-04-L 04 | Apply high build | 8 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 214-06-04-L 05 | Sand and prepare high build for fairs | 32 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 214-06-04-L 06 | Apply fairing compound and fair smooth | 64 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 214-06-04-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 214-06-04-L 08 | Final preparation of fair surface | 32 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 214-06-04-L 09 | Clean up and protect surface | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 214-06-05 | Final Primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 214-06-05-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 214-06-05-L 01 | Apply high build | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 214-06-05-L 02 | Sand high build to smooth | 8 | 12/12/24 | 12/12/24 | 4.0h | : | |
| 214-06-05-L 03 | Apply epoxy primer | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 214-06-05-L 04 | Final sand and smooth | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 214-06-06 | Top coat | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 214-06-06-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 214-06-06-L 01 | Apply top coat primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 214-06-06-L 02 | Apply finish top coat | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 215 | Main deck - Small Parts | 296 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 215-06 | Marine Painting | 296 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 215-06-01 | Cabinet doors | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 215-06-01-L | Labor | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 215-06-01-L 01 | Set up area for paint proccess | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 215-06-01-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 215-06-01-L 03 | Apply fairing compound and fair smooth | 32 | 12/06/24 | 12/09/24 | 16.0h | : | |
| 215-06-01-L 04 | Repair and fill pinholes in fairing surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 215-06-01-L 05 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 215-06-01-L 06 | Repair pinholes to finish primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 215-06-02 | Overhead panels | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 215-06-02-L | Labor | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 215-06-02-L 01 | Set up area for paint proccess | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 215-06-02-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 215-06-02-L 03 | Apply fairing compound and fair smooth | 32 | 12/06/24 | 12/09/24 | 16.0h | : | |
| 215-06-02-L 04 | Repair and fill pinholes in fairing surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 215-06-02-L 05 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 215-06-02-L 06 | Repair pinholes to finish primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 215-06-04 | Top coat | 8 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 215-06-04-L | Labor | 8 | 12/13/24 | 12/13/24 | 0.2w | : | |
| 215-06-04-L 01 | Apply top coat primer | 4 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 215-06-04-L 02 | Apply finish top coat | 4 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 216 | Decking - Main deck | 272 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 216-06 | Marine Painting | 272 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 216-06-01 | Decking | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 216-06-01-L | Labor | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 216-06-01-L 01 | Set up area for paint proccess | 16 | 11/28/24 | 11/29/24 | 8.0h | : | |
| 216-06-01-L 02 | Sand and prepare metal surface for primer | 16 | 11/29/24 | 12/02/24 | 8.0h | : | |
| 216-06-01-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/03/24 | 8.0h | : | |
| 216-06-01-L 04 | Apply high build | 16 | 12/03/24 | 12/04/24 | 8.0h | : | |
| 216-06-01-L 05 | Sand and prepare high build for fairs | 32 | 12/04/24 | 12/06/24 | 16.0h | : | |
| 216-06-01-L 06 | Apply fairing compound and fair smooth | 64 | 12/06/24 | 12/12/24 | 32.0h | : | |
| 216-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/12/24 | 12/13/24 | 8.0h | : | |
| 216-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 216-06-01-L 09 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 216-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 216-06-02-L | Labor | 64 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 216-06-02-L 01 | Apply high build | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 216-06-02-L 02 | Sand high build to smooth | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 216-06-02-L 03 | Apply epoxy primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 216-06-02-L 04 | Final sand and smooth | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230 | Flybridge - Outer Surfaces | 4,872 | 11/13/24 | 12/13/24 | 4.5w | : | |
| 230-06 | Marine Painting | 4,872 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-01 | Pilothouse cabin top | 1,056 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 230-06-01-L | Labor | 1,056 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 230-06-01-L 01 | Set up area for paint proccess | 96 | 11/18/24 | 11/19/24 | 16.0h | : | |
| 230-06-01-L 02 | Sand and prepare metal surface for primer | 96 | 11/20/24 | 11/21/24 | 16.0h | : | |
| 230-06-01-L 03 | Apply zinc chromate primer | 48 | 11/22/24 | 11/22/24 | 8.0h | : | |
| 230-06-01-L 04 | Apply high build | 48 | 11/25/24 | 11/25/24 | 8.0h | : | |
| 230-06-01-L 05 | Sand and prepare high build for fairs | 192 | 11/26/24 | 11/29/24 | 32.0h | : | |
| 230-06-01-L 06 | Apply fairing compound and fair smooth | 360 | 12/02/24 | 12/11/24 | 60.0h | : | |
| 230-06-01-L 07 | Repair and fill pinholes in fairing surface | 72 | 12/11/24 | 12/12/24 | 12.0h | : | |
| 230-06-01-L 08 | Final preparation of fair surface | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 230-06-01-L 09 | Clean up and protect surface | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230-06-02 | Port Weather Skirt | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-02-L | Labor | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-02-L 01 | Set up area for paint proccess | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 230-06-02-L 02 | Sand and prepare metal surface for primer | 96 | 11/13/24 | 11/15/24 | 16.0h | : | |
| 230-06-02-L 03 | Apply zinc chromate primer | 48 | 11/15/24 | 11/18/24 | 8.0h | : | |
| 230-06-02-L 04 | Apply high build | 48 | 11/18/24 | 11/19/24 | 8.0h | : | |
| 230-06-02-L 05 | Sand and prepare high build for fairs | 192 | 11/19/24 | 11/25/24 | 32.0h | : | |
| 230-06-02-L 06 | Apply fairing compound and fair smooth | 480 | 11/25/24 | 12/09/24 | 80.0h | : | |
| 230-06-02-L 07 | Repair and fill pinholes in fairing surface | 72 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 230-06-02-L 08 | Final preparation of fair surface | 96 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 230-06-02-L 09 | Clean up and protect surface | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230-06-03 | STBD Weather Skirt | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-03-L | Labor | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-03-L 01 | Set up area for paint proccess | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 230-06-03-L 02 | Sand and prepare metal surface for primer | 96 | 11/13/24 | 11/15/24 | 16.0h | : | |
| 230-06-03-L 03 | Apply zinc chromate primer | 48 | 11/15/24 | 11/18/24 | 8.0h | : | |
| 230-06-03-L 04 | Apply high build | 48 | 11/18/24 | 11/19/24 | 8.0h | : | |
| 230-06-03-L 05 | Sand and prepare high build for fairs | 192 | 11/19/24 | 11/25/24 | 32.0h | : | |
| 230-06-03-L 06 | Apply fairing compound and fair smooth | 480 | 11/25/24 | 12/09/24 | 80.0h | : | |
| 230-06-03-L 07 | Repair and fill pinholes in fairing surface | 72 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 230-06-03-L 08 | Final preparation of fair surface | 96 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 230-06-03-L 09 | Clean up and protect surface | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230-06-04 | AFT Weather Skirt | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-04-L | Labor | 1,176 | 11/13/24 | 12/13/24 | 180.0h | : | |
| 230-06-04-L 01 | Set up area for paint proccess | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 230-06-04-L 02 | Sand and prepare metal surface for primer | 96 | 11/13/24 | 11/15/24 | 16.0h | : | |
| 230-06-04-L 03 | Apply zinc chromate primer | 48 | 11/15/24 | 11/18/24 | 8.0h | : | |
| 230-06-04-L 04 | Apply high build | 48 | 11/18/24 | 11/19/24 | 8.0h | : | |
| 230-06-04-L 05 | Sand and prepare high build for fairs | 192 | 11/19/24 | 11/25/24 | 32.0h | : | |
| 230-06-04-L 06 | Apply fairing compound and fair smooth | 480 | 11/25/24 | 12/09/24 | 80.0h | : | |
| 230-06-04-L 07 | Repair and fill pinholes in fairing surface | 72 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 230-06-04-L 08 | Final preparation of fair surface | 96 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 230-06-04-L 09 | Clean up and protect surface | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230-06-05 | Final Primer | 192 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 230-06-05-L | Labor | 192 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 230-06-05-L 01 | Apply high build | 48 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 230-06-05-L 02 | Sand high build to smooth | 48 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 230-06-05-L 03 | Apply epoxy primer | 48 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 230-06-05-L 04 | Final sand and smooth | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 230-06-06 | Top coat | 96 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 230-06-06-L | Labor | 96 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 230-06-06-L 01 | Apply top coat primer | 48 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 230-06-06-L 02 | Apply finish top coat | 48 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231 | Flybridge - Inner Surfaces | 4,072 | 11/18/24 | 12/13/24 | 4.0w | : | |
| 231-06 | Marine Painting | 4,072 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 231-06-01 | Inner Bulwalk | 880 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 231-06-01-L | Labor | 880 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 231-06-01-L 01 | Set up area for paint proccess | 80 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 231-06-01-L 02 | Sand and prepare metal surface for primer | 80 | 11/18/24 | 11/19/24 | 16.0h | : | |
| 231-06-01-L 03 | Apply zinc chromate primer | 40 | 11/20/24 | 11/20/24 | 8.0h | : | |
| 231-06-01-L 04 | Apply high build | 40 | 11/21/24 | 11/21/24 | 8.0h | : | |
| 231-06-01-L 05 | Sand and prepare high build for fairs | 160 | 11/22/24 | 11/27/24 | 32.0h | : | |
| 231-06-01-L 06 | Apply fairing compound and fair smooth | 300 | 11/28/24 | 12/09/24 | 60.0h | : | |
| 231-06-01-L 07 | Repair and fill pinholes in fairing surface | 60 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 231-06-01-L 08 | Final preparation of fair surface | 80 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-01-L 09 | Clean up and protect surface | 40 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-02 | Helm Station | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-02-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-02-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-02-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-02-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-02-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-02-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-02-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-02-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-02-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-02-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-03 | Seat Base - Port FWD | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-03-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-03-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-03-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-03-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-03-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-03-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-03-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-03-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-03-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-03-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-04 | Seat Base - STBD FWD | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-04-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-04-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-04-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-04-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-04-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-04-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-04-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-04-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-04-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-04-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-05 | Bench Seat - Port | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-05-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-05-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-05-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-05-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-05-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-05-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-05-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-05-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-05-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-05-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-06 | AFT Bench Seat - Port | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-06-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-06-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-06-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-06-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-06-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-06-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-06-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-06-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-06-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-06-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-07 | AFT Bench Seat - STBD | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-07-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-07-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-07-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-07-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-07-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-07-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-07-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-07-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-07-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-07-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-08 | Cabinets - STBD | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-08-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-08-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-08-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-08-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-08-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-08-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-08-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-08-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-08-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-08-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-09 | Wet Bar | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-09-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-09-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-09-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-09-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-09-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-09-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-09-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-09-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-09-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-09-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-10 | Stairway Enclosure | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-10-L | Labor | 312 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 231-06-10-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-10-L 02 | Sand and prepare metal surface for primer | 24 | 11/28/24 | 11/28/24 | 8.0h | : | |
| 231-06-10-L 03 | Apply zinc chromate primer | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-10-L 04 | Apply high build | 12 | 11/29/24 | 11/29/24 | 4.0h | : | |
| 231-06-10-L 05 | Sand and prepare high build for fairs | 48 | 12/02/24 | 12/03/24 | 16.0h | : | |
| 231-06-10-L 06 | Apply fairing compound and fair smooth | 96 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 231-06-10-L 07 | Repair and fill pinholes in fairing surface | 24 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 231-06-10-L 08 | Final preparation of fair surface | 48 | 12/11/24 | 12/12/24 | 16.0h | : | |
| 231-06-10-L 09 | Clean up and protect surface | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-11 | Flybridge Decking | 288 | 11/29/24 | 12/13/24 | 88.0h | : | |
| 231-06-11-L | Labor | 288 | 11/29/24 | 12/13/24 | 88.0h | : | |
| 231-06-11-L 01 | Set up area for paint proccess | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-11-L 02 | Sand and prepare metal surface for primer | 24 | 11/29/24 | 11/29/24 | 8.0h | : | |
| 231-06-11-L 03 | Apply zinc chromate primer | 12 | 12/02/24 | 12/02/24 | 4.0h | : | |
| 231-06-11-L 05 | Apply high build | 12 | 12/02/24 | 12/02/24 | 4.0h | : | |
| 231-06-11-L 06 | Sand and prepare high build for fairs | 48 | 12/03/24 | 12/04/24 | 16.0h | : | |
| 231-06-11-L 07 | Apply fairing compound and fair smooth | 96 | 12/05/24 | 12/10/24 | 32.0h | : | |
| 231-06-11-L 08 | Repair and fill pinholes in fairing surface | 24 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 231-06-11-L 09 | Final preparation of fair surface | 48 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 231-06-12 | Final Primer | 48 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 231-06-12-L | Labor | 48 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 231-06-12-L 01 | Apply finish primer | 24 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 231-06-12-L 02 | Final sand and smooth | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 231-06-13 | Top coat | 48 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 231-06-13-L | Labor | 48 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 231-06-13-L 01 | Apply top coat primer | 24 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 231-06-13-L 02 | Apply finish top coat | 24 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 232 | Flybridge - Furniture | 512 | 11/28/24 | 12/13/24 | 2.4w | : | |
| 232-06 | Marine Painting | 512 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 232-06-01 | Cabinet doors | 256 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 232-06-01-L | Labor | 256 | 11/28/24 | 12/13/24 | 96.0h | : | |
| 232-06-01-L 01 | Set up area for paint proccess | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 232-06-01-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 232-06-01-L 03 | Apply fairing compound and fair smooth | 80 | 11/28/24 | 12/04/24 | 40.0h | : | |
| 232-06-01-L 04 | Repair and fill pinholes in fairing surface | 48 | 12/05/24 | 12/09/24 | 24.0h | : | |
| 232-06-01-L 05 | Final preparation of fair surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 232-06-01-L 06 | Clean up and protect surface | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 232-06-02 | Overhead panels | 240 | 11/29/24 | 12/13/24 | 88.0h | : | |
| 232-06-02-L | Labor | 240 | 11/29/24 | 12/13/24 | 88.0h | : | |
| 232-06-02-L 01 | Set up area for paint proccess | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 232-06-02-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 232-06-02-L 03 | Apply fairing compound and fair smooth | 64 | 11/29/24 | 12/04/24 | 32.0h | : | |
| 232-06-02-L 04 | Repair and fill pinholes in fairing surface | 48 | 12/05/24 | 12/09/24 | 24.0h | : | |
| 232-06-02-L 05 | Final preparation of fair surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 232-06-02-L 06 | Clean up and protect surface | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 232-06-03 | Top coat | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 232-06-03-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 232-06-03-L 01 | Apply top coat primer | 8 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 232-06-03-L 02 | Apply finish top coat | 8 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 233 | Flybridge - Small Parts | 296 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 233-06 | Marine Painting | 296 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 233-06-01 | Cabinet doors | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 233-06-01-L | Labor | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 233-06-01-L 01 | Set up area for paint proccess | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 233-06-01-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 233-06-01-L 03 | Apply fairing compound and fair smooth | 32 | 12/06/24 | 12/09/24 | 16.0h | : | |
| 233-06-01-L 04 | Repair and fill pinholes in fairing surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 233-06-01-L 05 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 233-06-01-L 06 | Repair pinholes to finish primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 233-06-02 | Overhead panels | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 233-06-02-L | Labor | 144 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 233-06-02-L 01 | Set up area for paint proccess | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 233-06-02-L 02 | Sand and prepare metal surface for primer | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 233-06-02-L 03 | Apply fairing compound and fair smooth | 32 | 12/06/24 | 12/09/24 | 16.0h | : | |
| 233-06-02-L 04 | Repair and fill pinholes in fairing surface | 32 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 233-06-02-L 05 | Final preparation of fair surface | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 233-06-02-L 06 | Repair pinholes to finish primer | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 233-06-04 | Top coat | 8 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 233-06-04-L | Labor | 8 | 12/13/24 | 12/13/24 | 0.2w | : | |
| 233-06-04-L 01 | Apply top coat primer | 4 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 233-06-04-L 02 | Apply finish top coat | 4 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 234 | Decking - Flybridge | 272 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 234-06 | Marine Painting | 272 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 234-06-01 | Decking | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 234-06-01-L | Labor | 208 | 11/28/24 | 12/13/24 | 92.0h | : | |
| 234-06-01-L 01 | Set up area for paint proccess | 16 | 11/28/24 | 11/29/24 | 8.0h | : | |
| 234-06-01-L 02 | Sand and prepare metal surface for primer | 16 | 11/29/24 | 12/02/24 | 8.0h | : | |
| 234-06-01-L 03 | Apply zinc chromate primer | 16 | 12/02/24 | 12/03/24 | 8.0h | : | |
| 234-06-01-L 04 | Apply high build | 16 | 12/03/24 | 12/04/24 | 8.0h | : | |
| 234-06-01-L 05 | Sand and prepare high build for fairs | 32 | 12/04/24 | 12/06/24 | 16.0h | : | |
| 234-06-01-L 06 | Apply fairing compound and fair smooth | 64 | 12/06/24 | 12/12/24 | 32.0h | : | |
| 234-06-01-L 07 | Repair and fill pinholes in fairing surface | 16 | 12/12/24 | 12/13/24 | 8.0h | : | |
| 234-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 234-06-01-L 09 | Clean up and protect surface | 8 | 12/13/24 | 12/13/24 | 4.0h | : | |
| 234-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 234-06-02-L | Labor | 64 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 234-06-02-L 01 | Apply high build | 16 | 12/10/24 | 12/10/24 | 8.0h | : | |
| 234-06-02-L 02 | Sand high build to smooth | 16 | 12/11/24 | 12/11/24 | 8.0h | : | |
| 234-06-02-L 03 | Apply epoxy primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 234-06-02-L 04 | Final sand and smooth | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 240 | Hardtop | 696 | 11/13/24 | 12/13/24 | 4.6w | : | |
| 240-06 | Marine Painting | 696 | 11/13/24 | 12/13/24 | 184.0h | : | |
| 240-06-01 | Hardtop Base | 600 | 11/13/24 | 12/13/24 | 184.0h | : | |
| 240-06-01-L | Labor | 600 | 11/13/24 | 12/13/24 | 184.0h | : | |
| 240-06-01-L 01 | Set up area for paint proccess | 48 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 240-06-01-L 02 | Sand and prepare metal surface for primer | 72 | 11/13/24 | 11/15/24 | 24.0h | : | |
| 240-06-01-L 03 | Apply zinc chromate primer | 24 | 11/18/24 | 11/18/24 | 8.0h | : | |
| 240-06-01-L 04 | Apply high build | 24 | 11/19/24 | 11/19/24 | 8.0h | : | |
| 240-06-01-L 05 | Sand and prepare high build for fairs | 72 | 11/20/24 | 11/22/24 | 24.0h | : | |
| 240-06-01-L 06 | Apply fairing compound and fair smooth | 240 | 11/25/24 | 12/06/24 | 80.0h | : | |
| 240-06-01-L 07 | Repair and fill pinholes in fairing surface | 48 | 12/09/24 | 12/10/24 | 16.0h | : | |
| 240-06-01-L 08 | Final preparation of fair surface | 72 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 240-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 240-06-02-L | Labor | 64 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 240-06-03 | Top coat | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 240-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 240-06-03-L 01 | Apply top coat primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 240-06-03-L 02 | Apply finish top coat | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 242 | Electronincs mast | 344 | 11/22/24 | 12/13/24 | 3.1w | : | |
| 242-06 | Marine Painting | 344 | 11/22/24 | 12/13/24 | 124.0h | : | |
| 242-06-01 | Mast Base | 248 | 11/22/24 | 12/13/24 | 124.0h | : | |
| 242-06-01-L | Labor | 248 | 11/22/24 | 12/13/24 | 124.0h | : | |
| 242-06-01-L 01 | Set up area for paint proccess | 16 | 11/22/24 | 11/25/24 | 8.0h | : | |
| 242-06-01-L 02 | Sand and prepare metal surface for primer | 32 | 11/25/24 | 11/27/24 | 16.0h | : | |
| 242-06-01-L 03 | Apply zinc chromate primer | 16 | 11/27/24 | 11/28/24 | 8.0h | : | |
| 242-06-01-L 04 | Apply high build | 16 | 11/28/24 | 11/29/24 | 8.0h | : | |
| 242-06-01-L 05 | Sand and prepare high build for fairs | 32 | 11/29/24 | 12/03/24 | 16.0h | : | |
| 242-06-01-L 06 | Apply fairing compound and fair smooth | 80 | 12/03/24 | 12/10/24 | 40.0h | : | |
| 242-06-01-L 07 | Repair and fill pinholes in fairing surface | 32 | 12/10/24 | 12/12/24 | 16.0h | : | |
| 242-06-01-L 08 | Final preparation of fair surface | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 242-06-02 | Final Primer | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 242-06-03 | Top coat | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 242-06-03-L | Labor | 32 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 242-06-03-L 01 | Apply top coat primer | 16 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 242-06-03-L 02 | Apply finish top coat | 16 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 245 | Underwater surfaces | 704 | 11/18/24 | 12/13/24 | 4.0w | : | |
| 245-06 | Marine Painting | 704 | 11/18/24 | 12/13/24 | 4.0w | : | |
| 245-06-01 | Set up/Prep area | 64 | 12/11/24 | 12/13/24 | 18.0h | : | |
| 245-06-01-L | Labor | 64 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 245-06-01-L 01 | Area set up | 32 | 12/12/24 | 12/12/24 | 8.0h | : | |
| 245-06-01-L 02 | Surface preparation & blasting | 32 | 12/13/24 | 12/13/24 | 8.0h | : | |
| 245-06-02 | Top coat | 640 | 11/18/24 | 12/13/24 | 160.0h | : | |
| 245-06-02-L | Labor | 640 | 11/18/24 | 12/13/24 | 4.0w | : | |
| 245-06-02-L 01 | Apply finsh bottom paint - Hull | 128 | 11/18/24 | 11/21/24 | 32.0h | : | |
| 245-06-02-L 02 | Apply finsh bottom paint - bowthruster grill | 128 | 11/22/24 | 11/27/24 | 32.0h | : | |
| 245-06-02-L 03 | Apply finsh bottom paint - Raw water grills | 128 | 11/28/24 | 12/03/24 | 32.0h | : | |
| 245-06-02-L 04 | Apply finsh bottom paint - Stabilizer fins | 128 | 12/04/24 | 12/09/24 | 32.0h | : | |
| 245-06-02-L 05 | Apply finsh bottom paint - Rudders | 128 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 3 | MECHANICAL SYSTEMS | 392 | 12/06/24 | 12/13/24 | 67.2w | : | |
| 301 | Freshwater | 48 | 12/06/24 | 12/13/24 | 3.5w | : | |
| 301-06 | Marine Painting | 48 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 301-06-02 | Components | 48 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 301-06-02-L | Labor | 48 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 301-06-02-L 01 | Paint pump brackets | 24 | 12/06/24 | 12/10/24 | 24.0h | : | |
| 301-06-02-L 02 | Paint waterheater brackets | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 302 | Graywater system | 112 | 12/12/24 | 12/13/24 | 4.0w | : | |
| 302-06 | Marine Painting | 112 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 302-06-01 | Tank Inner Surfaces | 80 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 302-06-01-L | Labor | 80 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 302-06-01-L 01 | Prep inner tank for finish coat (P) | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 302-06-01-L 02 | Paint inner tank epoxy primer (P) | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 302-06-01-L 03 | Paint inner tank epoxy finish coat (P) | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 302-06-02 | Tank Inner Coverings | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 302-06-02-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 302-06-02-L 01 | Paint pump | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 302-06-03 | Foundations | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 302-06-03-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 302-06-03-L 01 | Paint pump brackets | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 303 | Blackwater | 128 | 12/11/24 | 12/13/24 | 4.5w | : | |
| 303-06 | Marine Painting | 128 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 303-06-01 | Tanks | 80 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 303-06-01-L | Labor | 80 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 303-06-01-L 01 | Prep inner tank for finish coat (P) | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 303-06-01-L 02 | Paint inner tank epoxy primer (P) | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 303-06-01-L 03 | Paint inner tank epoxy finish coat (P) | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 303-06-02 | Tank Finish | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 303-06-02-L | Labor | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 303-06-02-L 01 | Paint pump | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 303-06-03 | Foundations | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 303-06-03-L | Labor | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 303-06-03-L 01 | Paint pump brackets | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 310 | Compressed air system | 16 | 12/12/24 | 12/13/24 | 3.0w | : | |
| 310-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 310-06-01 | Equipment | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 310-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 310-06-01-L 01 | Paint pumps | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 312 | Bilge system | 24 | 12/11/24 | 12/13/24 | 4.0w | : | |
| 312-06 | Marine Painting | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 312-06-01 | Foundations | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 312-06-01-L | Labor | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 312-06-01-L 01 | Paint pump brackets | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 314 | Fuel oil | 40 | 12/09/24 | 12/13/24 | 2.9w | : | |
| 314-06 | Marine Painting | 40 | 12/09/24 | 12/13/24 | 1.0w | : | |
| 314-06-01 | Foundations | 40 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 314-06-01-L | Labor | 40 | 12/09/24 | 12/13/24 | 1.0w | : | |
| 314-06-01-L 01 | Paint pump brackets | 40 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 330 | Watermakers | 24 | 12/11/24 | 12/13/24 | 1.5w | : | |
| 330-06 | Marine Painting | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 330-06-01 | Equipment | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 330-06-01-L | Labor | 24 | 12/11/24 | 12/13/24 | 0.6w | : | |
| 330-06-01-L 01 | Paint pumps | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 4 | ENGINE ROOM | 392 | 11/25/24 | 12/13/24 | 13.7w | : | |
| 401 | Insulation | 304 | 12/04/24 | 12/13/24 | 2.0w | : | |
| 401-06 | Marine Painting | 304 | 12/04/24 | 12/13/24 | 64.0h | : | |
| 401-06-01 | Sound Dampening - P | 96 | 12/06/24 | 12/13/24 | 48.0h | : | |
| 401-06-01-L | Labor | 96 | 12/06/24 | 12/13/24 | 1.2w | : | |
| 401-06-01-L 01 | Apply spray insulation to fwd bulkhead | 24 | 12/06/24 | 12/09/24 | 12.0h | : | |
| 401-06-01-L 02 | Apply spray insulation to aft bulkhead | 24 | 12/09/24 | 12/10/24 | 12.0h | : | |
| 401-06-01-L 03 | Apply spray insulation to ship side | 24 | 12/11/24 | 12/12/24 | 12.0h | : | |
| 401-06-01-L 04 | Apply spray insulation to overhead | 24 | 12/12/24 | 12/13/24 | 12.0h | : | |
| 401-06-02 | Brackets/Foundations - P | 80 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 401-06-02-L | Labor | 80 | 12/09/24 | 12/13/24 | 1.0w | : | |
| 401-06-02-L 01 | Paint machiney foundations | 48 | 12/09/24 | 12/11/24 | 24.0h | : | |
| 401-06-02-L 02 | Paint engine panel enclosures | 32 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 401-06-03 | Equipment | 128 | 12/04/24 | 12/13/24 | 64.0h | : | |
| 401-06-03-L | Labor | 128 | 12/04/24 | 12/13/24 | 1.6w | : | |
| 401-06-03-L 01 | Paint bilge | 48 | 12/04/24 | 12/06/24 | 24.0h | : | |
| 401-06-03-L 02 | Paint equipment | 80 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 420 | Lube oil | 64 | 12/10/24 | 12/13/24 | 2.2w | : | |
| 420-06 | Marine Painting | 64 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 420-06-01 | Equipment - P | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 420-06-01-L | Labor | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 420-06-01-L 01 | Paint pump | 16 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 420-06-01-L 02 | Paint manifold | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 420-06-02 | Equipment - S | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 420-06-02-L | Labor | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 420-06-02-L 01 | Paint pump | 16 | 12/10/24 | 12/11/24 | 16.0h | : | |
| 420-06-02-L 02 | Paint manifold | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 422 | Engine ventilation | 24 | 12/11/24 | 12/13/24 | 1.7w | : | |
| 422-06 | Marine Painting | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 422-06-01 | Equipment | 24 | 12/11/24 | 12/13/24 | 24.0h | : | |
| 6 | INTERIOR | 128 | 12/12/24 | 12/13/24 | 4.2w | : | |
| 603 | Guest Bathroom 1 | 16 | 12/12/24 | 12/13/24 | 2.4w | : | |
| 603-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 603-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 603-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 603-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 605 | Guest Bathroom 2 | 16 | 12/12/24 | 12/13/24 | 2.4w | : | |
| 605-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 605-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 605-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 605-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 607 | Guest Bathroom 3 | 16 | 12/12/24 | 12/13/24 | 2.4w | : | |
| 607-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 607-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 607-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 607-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 609 | Guest Bathroom 4 | 16 | 12/12/24 | 12/13/24 | 2.4w | : | |
| 609-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 609-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 609-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 609-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 621 | Captain's Bathroom | 16 | 12/12/24 | 12/13/24 | 1.9w | : | |
| 621-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 621-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 621-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 621-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 623 | Crew Bathroom | 16 | 12/12/24 | 12/13/24 | 1.9w | : | |
| 623-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 623-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 623-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 623-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 625 | Crew Bathroom 2 | 16 | 12/12/24 | 12/13/24 | 1.9w | : | |
| 625-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 625-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 625-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 625-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 643 | Owners Bathroom | 16 | 12/12/24 | 12/13/24 | 3.8w | : | |
| 643-06 | Marine Painting | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 643-06-01 | Ceiling | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 643-06-01-L | Labor | 16 | 12/12/24 | 12/13/24 | 0.4w | : | |
| 643-06-01-L 01 | Paint overhead panels | 16 | 12/12/24 | 12/13/24 | 16.0h | : | |
| 8 | EXTERIOR | 136 | 12/09/24 | 12/13/24 | 33.2w | : | |
| 803 | Main deck Walkway - Port | 32 | 12/10/24 | 12/13/24 | 1.7w | : | |
| 803-06 | Marine Painting | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 803-06-01 | Overhead | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 803-06-01-L | Labor | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 803-06-01-L 01 | Paint overhead panels | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 804 | Main deck Walkway - STBD | 32 | 12/10/24 | 12/13/24 | 1.7w | : | |
| 804-06 | Marine Painting | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 804-06-01 | Overhead | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 804-06-01-L | Labor | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 804-06-01-L 01 | Paint overhead panels | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 805 | Main deck - Aft | 32 | 12/10/24 | 12/13/24 | 4.0w | : | |
| 805-06 | Marine Painting | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 805-06-01 | Overhead | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 805-06-01-L | Labor | 32 | 12/10/24 | 12/13/24 | 0.8w | : | |
| 805-06-01-L 01 | Paint overhead panels | 32 | 12/10/24 | 12/13/24 | 32.0h | : | |
| 816 | Hardtop | 40 | 12/09/24 | 12/13/24 | 2.8w | : | |
| 816-06 | Marine Painting | 40 | 12/09/24 | 12/13/24 | 1.0w | : | |
| 816-06-01 | Overhead Panels | 40 | 12/09/24 | 12/13/24 | 40.0h | : | |
| 816-06-01-L | Labor | 40 | 12/09/24 | 12/13/24 | 1.0w | : | |
| 816-06-01-L 01 | Paint overhead panels | 40 | 12/09/24 | 12/13/24 | 40.0h | : | |
| | |
| ******** | ****************************** | ******** | *********** | *********** | ********** | | *********** |
1. SCHEDULE BASELINE
* 1.1 Project Baseline
